REFILLING INSTRUCTION & SAFETY TIPS
Premium butane is required to ensure optimum performance of your lighter. Lighters require the cleanest butane available at a pressure of 45 psi. Recommended using Premium Triple Refined Butane Gas with a metal fill tip nozzle. Non-premium butane with plastic fill tip nozzles are not recommended as they may cause inconsistent ignition and performance. Impurity of the gas can cause clogging of the burner valve or malfunctioning
Please empty the lighter of all butane gas before you refill the lighter.
- Safety Instructions Before Emptying A Lighter:
- When emptying a lighter, please keep the lighter away from face as well as away from an open flame, heat source or a source of static charge.
- Please DO NOT try to ignite a lighter while it is being emptied or refilled.
- Keep the lighter and butane gas away from Children.
- Please empty the lighter in an area with good ventilation.
- Browse through the warnings on butane cartridge.
- If the lighter has a cover, please keep it closed while emptying the lighter.
- How to Empty the Lighter?
- To empty it, hold it in vertically upright and depress the filler valve (located at the bottom of lighter) with a ball-pen or screwdriver.
- Continue applying the pressure on the valve till the hissing sound stops, making sure no butane gas or air is left in the lighter.
- How to Refill the lighter:
- Please make sure the lighter is completely emptied out of butane before you attempt to refill it.
- See instructions above to learn how to empty a lighter.
- Set the flame adjuster (located at bottom of a lighter) to "-" position as far as possible.
- Turn the lighter upside down so that you can see the butane valve.
- While the lighter is upside down, press the butane canister nozzle tip firmly for five seconds.
- The lighter should be filled now. Please use only PREMIUM BUTANE to refill your lighter. We highly recommend using DUCO Triple Refined Butane.
- Wait at least 3 minutes before you ignite the lighter. If you hear a hissing sound coming out of the lighter during this waiting period then please do not ignite the lighter. Please return it to manufacturer for repair or replacement.
- Rotate the flame adjuster (located on the metal flame guard) towards "+" sign (not all the way).
- Now you can ignite your lighter. Please adjust the flame height as per your requirement by moving the flame adjuster towards "+" to increase flame height or "-" to decrease flame height. |
